Sprockets for roller chains: customized and immediately available
Our sprockets and plate sprockets are made of C 45, stainless steel and special material. In addition to hardened toothing we can also supply surface refined types.
Standard sprockets are supplied with a hub on one side and are suitable for simplex, duplex and triplex chains. Furthermore, our product range comprises a number of possibilities with regard to hole circle bores and lightening holes..
Our standard range includes sprockets with pitches from p = 6 mm to p = 76.2 mm and a material strength between 500 N/mm² and 600 N/mm². These sprockets come with pre-bores according to our catalogue and can usually be delivered ex stock. If the number of teeth exceeds a certain minimum, sprockets made of cast iron can also be supplied. On request, we are happy to offer different types as well.
Stainless steel sprockets for roller chains
Additionally, we can offer our customers a wide range of stainless steel sprockets for roller chains according to ISO 606. The characteristic features are the same as with sprockets made of normal steel. Our range comprises sprockets with pitches from p = 9.525 mm to p = 25.4 mm with the following number of teeth: 13 / 15 / 17 / 19 / 21 / 23 / 25. These sprockets can usually also be supplied ex stock with pre-bores according to our catalogue. On request, we are happy to offer different types as well.
Machining of sprockets
All our sprockets mentioned above can be supplied with:
- Bore and groove
- Tapped and pin holes for bore
- Tapped and pin holes for bore on pitch circle
- Slot holes on hub and hole circle
Wippermann will always supply optimally aligned and matched “ready-to-install” end products.
Product information
Sprockets for roller chains (PDF)
Your personal contact partner
Get in touch now